The 2FA requirement cannot be skipped - it protects your account and the sensor data attached to it.
The easiest way - no code and no typing of tokens:
The sensor fetches its token by itself within about 30 seconds and then appears in the dashboard automatically. You can set the name (e.g. "Living room") afterwards under "My settings".
Other options:
Once the sensor has sent data successfully, it closes its config page for security reasons. To open it again, briefly power the sensor off. A reset (hold the button for 5 seconds) clears Wi-Fi, email and access protection; the token is kept.
Both can be set in the profile under "My Sensors" directly on the respective sensor:
Both settings are optional and don't affect the readings themselves - they're only for overview and control purposes.
In the profile under "Notifications", you can set up rules per sensor that send an email warning when:
As soon as a rule triggers, an email is sent - and once the situation returns to normal, a second "back to normal" email is sent automatically. It won't repeatedly spam you as long as the state stays unchanged. Optionally, each rule can have its own recipient email address (otherwise the login email is used) and its own custom message.
Every rule can be edited, disabled, or deleted at any time. The last five notifications sent per rule can be viewed directly below it (time, value, recipient email address).
In the profile under "My Sensors", every sensor has a "Share" section. Enter the email address of another already-registered account there and click "👥 Share".
The other person will then see the sensor under "Shared Sensors" (link at the top of the dashboard) - there they can view the values in the chart and export them as CSV, but not edit: label, location, token, measuring interval, and notifications remain reserved exclusively for you as the owner.
Anyone who already has access to a sensor is listed directly in the profile next to that sensor - the share can be removed again at any time from there.
Je nach eingesetzter Sensor-Hardware erscheinen unterschiedliche Kacheln/Diagramme im Dashboard. Übersicht aller Symbole:
Genauigkeit ±0,3 °C (typisch 0-90 °C, Einsatzbereich des Sensors -40 bis +125 °C). Direkt als Zahl ablesbar, keine besondere Einordnung nötig.
Genauigkeit ±2 % r.F. Als grobe Orientierung gelten 30-60 % in Wohnräumen meist als angenehm - Werte darunter oder deutlich darüber können je nach Raum und Jahreszeit auf zu trockene bzw. zu feuchte Luft hindeuten.
Nur bei Sensoren mit BME280. Normaler Bereich auf Meereshöhe liegt grob zwischen 970 und 1040 hPa - der genaue Wert hängt aber auch von der Höhenlage des Sensors ab und ist daher nicht direkt mit Wetterberichten vergleichbar. Aussagekräftiger als der absolute Wert ist meist der Trend: Ein fallender Luftdruck deutet häufig auf herannahenden Regen/Schlechtwetter hin, ein steigender auf stabileres, oft trockeneres Wetter.
Nur bei Sensoren mit MQ-2. WICHTIG: Das ist ein relativer Rohwert (0-100 %), keine kalibrierte Gaskonzentration - der Ruhewert bei sauberer Luft liegt je nach Sensor-Exemplar und Aufwärmzustand unterschiedlich, oft nahe 0. Aussagekräftig ist daher nicht der absolute Wert, sondern ein plötzlicher, deutlicher Anstieg gegenüber dem gewohnten Ruhewert. Kein Ersatz für einen zertifizierten Rauchmelder/Gaswarner.
Nur bei Sensoren mit CCS811. eCO2 = äquivalenter, aus dem TVOC-Rohsignal berechneter CO2-Wert (ppm), keine direkte CO2-Messung. Grobe Orientierung: ca. 400 ppm entspricht sauberer Außenluft, 400-1000 ppm ist in Innenräumen normal, 1000-2000 ppm gilt als spürbar „verbraucht" (Lüften empfehlenswert), über 2000 ppm als schlecht (zeitnah lüften). Nach dem Einschalten braucht der Sensor ca. 20 Minuten, bis sich die Werte stabilisieren.
Flüchtige organische Verbindungen (ppb), wird vom selben CCS811-Sensor zusammen mit CO2 gemessen. Als grobe Orientierung (nach gängigen Richtwerten, keine offizielle Grenzwert-Norm): unter ca. 220 ppb gilt als gut, 220-660 ppb als mäßig, 660-2200 ppb als auffällig (z.B. durch Reinigungsmittel, frische Farbe, Möbelausdünstung), darüber als deutlich erhöht. Wie beim CO2-Wert braucht der Sensor nach dem Einschalten ca. 20 Minuten Einlaufzeit.
Prozentwert, aus der gemessenen Spannung berechnet (je nach Sensor-Variante für Alkaline-, NiMH- oder LiPo-Akkus kalibriert). Direkt als Prozentangabe ablesbar.
Nur bei Sensoren mit GPS-Modul. Genauigkeit ca. 2,5 m unter guten Empfangsbedingungen (freier Himmel). Verlauf einsehbar unter „GPS-Verlauf", verlinkt aus der jeweiligen Sensor-Kachel im Dashboard.
Sensors and matching enclosures are not yet available ready-made in stores. On the enclosure page you can see examples and sign up without obligation - we will get in touch as soon as there is news.